AUTOOL CT Injector Cleaning Machine Series Aftermarket Guide

The AUTOOL CT injector cleaning machine series simulates engine working conditions to clean and inspect automotive injectors. The equipment serves the automotive and motorbike repair industries, as well as scientific research, teaching, and training departments. This article will provide you with a detailed introduction to the CT injector cleaning machine series product use and after-sales preventive precautions.

1.Introduction of CT fuel injector cleaning series products:

• Input voltage: this product has two models of European / U.S. regulations, please note the region when photographed!
• Test tube capacity: We recently upgraded the test tube based on customer feedback. We replaced the 0-140ml test tube, which did not clearly show injector test specifics, with a 0-100ml test tube.We recommend adding 100ml of alcohol.
• Multiple Test Modes: Support test time/simulated speed/low and high idle detection
• Support the cleaning fluid heating: some models let the injector cleaning efficiency significantly improved, such as cleaning business more recommended CT160.
• Cleaning fluid recovery valve: the inexhaustible test fluid to support the secondary recovery, environmental protection and green to reduce environmental pollution.
• Storage drawer: equipped with a variety of injector interfaces, portable and good storage at the same time for you to solve the problem of compatible injectors.

2.CT fuel injector cleaning series products use video:

3.Precautions for CT fuel injector tester series products:

 a.Injector cleaning:

• The ultrasonic cleaning function supports all models/types of injectors for inspection;
• It is recommended to use professional carbon cleaning fluid for cleaning.

 b.Injector Nozzle Inspection:

• We only support inspection of automotive injectors.
• Only CT400/500 support testing of GDI injector models
• We recommend using professional automotive injector test fluid. If unavailable, you can use medical alcohol with more than 99% alcohol content as a substitute.
• Do not use water for testing, as it may damage the pump head and other parts. The warranty does not cover human error.

   c.About cleaning and testing fluids:

• Cleaning and test liquids (industrial alcohol) should not be mixed. If unsure, contact me in advance with a picture.Onlie Support>>
• Test fluid: the glass bottle contains test fluid, usually professional injector test fluid or industrial alcohol. To avoid corrosion, do not put cleaning fluids or any other corrosive fluids into the cylinder.

4.CT fuel injector tester series Q&A:

Q: Oil leakage from oil separator assembly.

A: When the oil separator leaks, check if the installed ‘O’ ring is mismatched, deformed, or damaged. Replace it if mismatched or damaged. Do not over-tighten the two black adjusting screws, as this may cause oil leakage from the separator.

Q: Oil pressure drops slowly.

A: It is impossible for the oil pressure to drop to zero in 1-2 minutes, you can use a hexagonal spanner to adjust the relief valve counterclockwise.

Q: The buzzer beeps for a long time without oil pressure.

A: The machine has a lack of oil alarm function. When the fluid level is low, a beep sounds, and the pump and injectors shut off. Once you add enough fluid, the beep stops. In this case, it is necessary to press the [Run] key to restart the oil pump.

Q: The Drain Key must be pressed twice to completely drain the test solution.

A:The solenoid valve automatically shuts off after 15 seconds. If there is a large amount of liquid in the glass tube, you may need to drain it several times.

Q: Do I have to press by hand to adjust the value?

A: When you adjust the interval value too high, you can press and hold to change the data continuously, without needing to press repeatedly.

Q: How much cleaning solution and test solution should be added?

A: When adding cleaning fluid, it should not exceed the injector nozzle connection; test fluid should not exceed two-thirds of the glass tube screen.

5.Summary

Regular injector cleaning and testing ensures optimal car performance, promoting safety for yourself and others.. Hope that the above CT injector cleaning machine use guide can help you, let your car more healthy.