Guide to avoiding pitfalls in electric car charger for home installation

Installing an electric car charger for home can greatly improve the feeling of using the tram. After buying a tram, energy saving, and emission reduction at the same time, more need to charge the freedom, looking around for the location of public electric charging stations will always make people feel less comfortable with the use of the tram. However, when it comes to the installation of EV charging stations, many new car owners always worry about: How should I install an electric charging station? Who can install home chargers？ What materials should I prepare? For this series of questions, this article is for you to prepare the electric car charger for home installation strategy, I hope to greatly enhance your happiness with the car.

I. Who can install home chargers?

Ensure a qualified electrician installs your home charger. Non-professional installation can damage your electrical system, cause injury or death due to lack of proper precautions, and is even illegal in France without authorization. It is therefore important to have a professional visit to assess the installation before proceeding. Recommended for you AUTOOL C701 electric car charger for home. The AUTOOL C701 provides home level 2 charging with easy installation and up to 7 kW of power, compatible with most EV models, including those meeting the LEC 62196-2 standard.

2. Preparation before installing the home charging post?

You will need to determine in advance if your state requires relevant permits. some states require Permits for work on the structure of a house, electrical installations, plumbing or mechanical related (heating and cooling, etc.). installing a home charging post may require a specific permit. A level 2 electric car charger, commonly used for home installations, is typically plugged into a 240v outlet. These chargers can fully charge a car battery in just a few hours or overnight. Using a level 2 charger at home can add about 30 miles of range per hour.

Preparation:

Before installation, make sure that the basic equipment meets the requirements, including the special wiring and air switch, and install it in the proper location.

switches, and install them in the pre-designated locations. Tools: electric drill; hammer; standard Phillips screwdriver; wire stripper;

3. How to install EV home chargers?

A charging station can be installed either wall-mounted or column-type. Choose based on your parking space: wall-mounted for spaces near a wall, or column-type if no wall is available.

AUTOOL C701 Installation Procedure:

• Make holes in the wall.
• Insert four plastic expansion anchors into the corresponding holes.
• Place the mounting back bracket over the four mounting holes and secure it to the wall with four Phillips round head screws.
• Mount the back bracket and secure it to the wall with four M4*30 Phillips round-head screws.
• M4*30 Phillips round head screws to secure it to the wall.
• Attach the AC charging station to the back bracket.

Charging piles can be chosen as wall-mounted or column-type. It is recommended that new energy vehicle owners choose according to their own parking space site conditions, if close to the wall, you can choose the wall-mounted, if there is no wall you can choose the column type.

4. the price of an EV charger installed?

The cost of installing a home EV charger depends on factors like the model, location (indoors or outdoors), whether power is available, the charger’s type and speed, and any needed circuit upgrades. Installation typically starts at $300. It’s advisable to compare quotes and consult a professional electrician for an accurate estimate.