AUTOOL EM325 3in1 Car Jump Starter 12V 24V Quick Charge Auto Battery Charger with Charging & Jump Start & Welding Function
AUTOOL EM325 (Charging, Starting, Welding)
- Compared with ordinary charger, the charger is smaller, lighter and the power is higher;
- Charging time and power are twice as fast as traditional machines, and it is the most advanced electronic charger in China;
- The charging current can be adjusted within the range of 6-60A and is not affected by changes in the input AC voltage;
- The machine adopts smart temperature control, fan cooling and automatic shutdown protection in over-heat.
- It is mainly used to solve the breakdowns after the failure of starting a car, due to loss of power, aging and ultra-low temperature environment;
- The design of the car jump start power supply is safe;
- Convenient, reliable, no need to charge, ultra-low temperature start.
- Long service life and maintenance-free, to solve the problem that the car engine can
- O.C. means the over-current protection indicator.not start normally.
- Efficient, energy-saving and light, with good dynamics;
- Easy to do ARC welding: small splash, stable current and good forming;
- Suitable for all kinds of acid and alkaline welding rods;
- Wide range of uses: auto repair industry, aerial work, field operations, indoor and outdoor decoration.
AUTOOL EM325 Operation
- For battery charging, press the button “Charge/ Start”to “Charge”, after that the charging starts.
- Connect the positive clamp (+) to the battery positive (+) pole, connect the negative clamp (-) to the battery negative (-) pole.
- The charging value of charging depends on the type of rechargeable battery, generally it’s about 10% of its maximum current.
- The charging time depends on the type of battery; in addition, as the charging time grow more, the charging current will decline to some extent.
- This unit can be charged with one or more batteries at the same time. When you charge the vehicle, the original battery clamps should be removed.
- Turn off the power before removing the battery clamp.
- Fireworks or flame are strictly prohibited at the operation site as flammable gas will be generated during charging.
- Be careful to avoid rain, snow or moisture, as it will erode.
- The positive(+) and negative(-) poles must be distinguished while using.
- The machine should be protected from vibration or collision while using.
- Do not charge the battery that has ice on it.
- Clean the rechargeable battery before charging to prevent short circuits and detect the initial voltage.
- For starting the vehicle, press the button “Charge/ Start”to “Start” to function.
- When you start a high-powered engine, it is best to charge the car battery for about 15 minutes and then start.
- When start the diesel engine, the spark plug should be preheated before starting.
- When connect the clamps, connect the negative pole first and then the positive pole.
The main unit * 1pc
Power cord with clamp for welding (only used for EM 325) * 1pc
Power cord with (+)clamp for charging/starting * 1pc
Power cord with (-)clamp for charging/starting * 1pc
Manual * 1pc
Quality certificate * 1pc